Get started with Zen 65 in just a few minutes.
This section covers basic connection methods, OS layout switching, and battery level checking — enough to get you typing right away.
Zen 65 supports three connection modes: Wired, 2.4GHz wireless, and BT.
The active mode is indicated by the LEDs near the top row.
Please follow the steps below to use the keyboard in wired mode.
Fn + T until the T indicator is selected.💡 Wired mode provides the most stable connection and is recommended for firmware updates.
Fn + R until the R indicator blinks.💡 Note
For best wireless performance:
- Keep the dongle away from USB 3.0 devices and other 2.4GHz interference sources (such as routers).
- Using a USB extension cable often improves signal stability.
- Optimal distance between keyboard and dongle is within 15 cm.
Zen 65 supports up to three BT devices.
Fn + Q / W / E to enter pairing mode.(Rapid flashing indicates pairing is active).Bluetooth Channel Mapping
| Bluetooth Slot | Key Combination | Device Name |
|---|---|---|
| Channel 1 | Fn + Q |
Zen 65 RGB-1 |
| Channel 2 | Fn + W |
Zen 65 RGB-2 |
| Channel 3 | Fn + E |
Zen 65 RGB-3 |
The keyboard is set to Windows mode by default.
Hold Fn + A for 3 seconds to switch to Windows mode.
Hold Fn + S for 3 seconds to switch to macOS mode.
The keyboard will automatically apply the correct key mapping.
💡This setting is stored on the keyboard and does not require software.
Battery level can be checked directly from the keyboard.
Display behaviour differs between Wired and Wireless modes.
Fn + Backspace.| Keys Lit | Battery Level |
|---|---|
| 🔴 1–3 | Below 40% |
| 🟡 1–7 | 40%–79% |
| 🟢 1–0 | 80%–100% |
- Each number key represents 10%.
- All keys lit indicates a full charge.
Fn + Backspace.