The keyboard supports a wide range of functions through FN key combinations, allowing you to control system behavior, multimedia playback, and keyboard-specific features efficiently.
While the Quick Start guide covers basic OS switching, the Wave 75 offers extensive shortcuts for multimedia and system control.
| Key | Windows (FN+) |
Mac (FN+) |
Mac (Direct Press / No FN) |
END |
Restore factory setting | N/A | Restore factory setting |
F1 |
Screen Brightness - | F1 | Screen brightness - |
F2 |
Screen Brightness + | F2 | Screen brightness + |
F3 |
Home page | F3 | Mission Control |
F4 |
F4 | Launchpad | |
F5 |
Calculator | F5 | Backlight brightness - |
F6 |
Media Player | F6 | Backlight brightness + |
F7 |
Previous song | F7 | Previous song |
F8 |
Pause/Play | F8 | Pause/Play |
F9 |
Next song | F9 | Next song |
F10 |
Mute | F10 | Mute |
F11 |
Volume - | F11 | Volume - |
F12 |
Volume + | F12 | Volume + |
Win |
Lock/Unlock Windows Key | N/A | Alt |
A |
N/A | Switch Win modes | A |
S |
Switch MAC modes | N/A | S |
N |
Toggle between N-Key and 6-Key Rollover | Toggle between N-Key and 6-Key Rollover | N |
BackSpace |
Show battery | Show battery | BakcSpace |
💡Notes
- Locking the Windows key helps prevent accidental interruptions during gaming.
- Restoring factory settings will reset lighting effects and key configurations.
Elevate your desk setup with fully customizable RGB backlighting and independent front/rear ambient lighting effects. The integrated dot-matrix screen provides real-time status updates and allows for seamless adjustment of display modes and animation speeds.
Key (FN+) |
NO RGB Version | RGB Versions |
[ { / ] } |
N/A | Adjust LOGO light speed -/+ |
- _ / = + |
N/A | Adjust LOGO light brightness -/+ |
; : / ' " |
N/A | Adjust LOGO light saturation -/+ |
↑ / ↓ |
Adjust LOGO light brightness +/- | Backlight brightness +/- |
← / → |
Adjust LOGO light speed -/+ | Backlight speed -/+ |
\ | |
Switch LOGO light colors | Switch backlight modes |
Enter |
Switch LOGO light colors | Switch backlight colors |
Delete |
Turn on/off LOGO light | Turn on/off all lights |
PgUp/PgDn |
Adjust LOGO light saturation -/+ | Backlight saturation +/- |
Space |
N/A | Switch LOGO lighting effects |
R_Shift |
N/A | Switch LOGO light colors |
💡Note: The QMK system cannot turn the LOGO light on or off separately. If you need to turn off the backlight/logo light separately in the RGB version, you can do so by adjusting the brightness separately (the lowest brightness is to turn off the light).
Battery level checking is covered in the Quick Start guide. This section covers charging and sleep behaviors.
Low Battery: The front logo will slowly flash red continuously. This will stop once the keyboard is plugged in to charge.
Charging: The number keys 1! through 0) will display a green wave effect (keys 1! through 5% for the NO RGB version).
Fully Charged: The number keys 1! through 0) will illuminate solid green (keys 1! through 5% for the NO RGB version).
⚠️Caution: The keyboard is rated at 5V–500mAh. Do not use cables or fast chargers exceeding 5V, as this may damage the keyboard and pose safety risks.
*Damage caused by over-voltage cables is not covered under warranty.
Unlock the full potential of your keyboard with two distinct firmware options. Please note that QMK/VIA and PMO HUB require their own specific firmware. You must flash the corresponding firmware for your preferred software: